← All posts

Checking Emergency Access Routes in a City Twin Before a Call Comes In

Fire engines and ambulances need routes that stay passable at the moment they are needed, not only on a map. A road may look clear yet be blocked by parked delivery vans, a market stall, a temporary barrier or a works zone that narrows the carriageway. A city digital twin can hold the road network with lane widths, turning radii, bollards, height limits and parking rules, so planners can check whether a ladder truck can reach each high-rise entrance.

The method starts with a baseline. Engineers import road geometry from the GIS layer, then attach live feeds such as traffic counters, parking sensor data where it exists, and the municipality's list of planned closures. Each emergency access route is tagged with the vehicle class it must serve. The model then marks each segment as passable or not. A route that works for a standard pumper may fail for a heavier aerial appliance because of one tight junction.

Scenarios matter more than static checks. A useful test might assume a Saturday market in one district, a water main repair on the main avenue, and a fire alarm at a residential block two streets away. The model dispatches the vehicle from the nearest station along alternative paths, records travel time, and flags any turn that is physically impossible. Operators can see which bollard, parked row or signal timing causes the delay, instead of discovering it during a real call.

Results should lead to rules people can act on. Some fixes are physical, such as widening a corner or relocating a bollard. Others are procedural: a time window for loading bays, clear-zone markings enforced by patrols, or a default diversion plan published to dispatch software. The twin can be rerun after each change to confirm the improvement holds at peak hours, not only in quiet periods. The limits must be stated too. The model is only as current as its parking and closure data, and it cannot predict driver behaviour perfectly.

Governance keeps the exercise useful. Fire services, traffic departments and the municipality should agree on which vehicle profiles and which routes are official, and who updates the closure feed when a works permit is issued late at night. Versioned scenario reports also help after an incident, because staff can compare the planned route with what actually happened on the ground.

Platforms such as TwinUp's Clavus City can host this kind of access check alongside other municipal layers, so the same model used to plan road works also shows emergency reach. Teams should begin with a few high-risk districts, validate the results against a real drill, and expand only when the checks match what crews experience on the road.

All posts